Philips CTX503WHT/00 - Manual (Page 8)

Getting started 7
messages, and audio/video/picture files. With the
software and GPRS service, you can also connect
your PC to the Internet through your phone.
Install MobilePhoneTools on your PC
1 Insert the supplied Data communication
software into the CD drive.
2 Run the autorun.exe program.
3 Make selections as prompted, and installation
starts automatically.
Connecting your Phone to the PC
1 Connect your phone to the PC using the
supplied USB cable or through the Bluetooth.
2 When using the USB cable for connection,
select COM port on your phone.
3 On your PC, double click the MobilePhoneTools
icon, then the connected icon is displayed.
Customize your phone
Customize your phone to match your preferences.
Set clock
1 On the home screen, go to Menu > Settings >
General > Time and date .
2 Select Set time / date : Enter the digits or long
press navigation key
+
or
-
until you reach the
desired digits.
SIM settings
1 Check that your phone is turned on. Enter the
PIN code if required.
2 Go to Settings > SIM settings > Dual SIM
setting > SIM1/SIM2 setup , name your SIM card.
3 Select SIM1 or SIM2 to be the primary card.
4 Go to SIM settings > Mode setting , select your
desired options.
Note:
• The PIN code is preconfigured and communicated to
you by your network operator or retailer.
• If you enter an incorrect PIN code three times in
succession, your SIM card will be blocked. To unblock it,
you must request the PUK code from your operator.