Pioneer CDJ-1000MK2 - Manual (Page 10)

10
En
Display
51 Calendar display (1 – ;,
\)
TRACK numbers beyond the current track lights. When the next track is 21 or beyond,
\ lights. When Cue points or loops are stored, an underscore lights in the correspond-
ing TRACK numbers.
52 TRACK Number indicator
Displays TRACK numbers.
53 Auto Cue indicator (A. CUE)
Lights when auto cue is on.
54 REMAIN indicator
Indicates that track remaining time is being displayed.
55 Time display (min) (M)
56 Time display (sec) (S)
57 Frame display (F)
One second is 75 frames.
58 Playback Tempo display (TEMPO)
Indicates the rate of change in the playback tempo.
59 Tempo Adjustment Range indicator (±6, ±10, ±16, WIDE)
Indicates the variable range of the Tempo Control knob selected with the TEMPO
Control Range button. When ±100% is selected, the WIDE indicator appears in the
display.
60 Reverse indicator (REV)
Indicates that the DIRECTION FWD/REV switch is set to reverse ([REV] position).
61 MEMORY LOOP indicator
Displays the selected track loop memory position above the playback address display (10
points). Even when there may be several memory points in the same block, only one lights.
62 MEMORY CUE indicator
Displays the selected cue memory positions under the playback address display (10
points). Even when there may be several memory points in the same block, only one
lights.
63 ZOOM indicator
Indicates that WAVE is indicated in zoom mode.
64 RELOOP indicator
Lights when the unit is in reloop standby or performing a loop.
35 SEARCH button (
1, ¡) ☞ P.12
36 TRACK SEARCH button (
4, ¢) ☞ P.12
37 Reverse indicator (REV) (*)
Lights when the DIRECTION FWD/REV switch is set to reverse.
38 DIRECTION FWD/REV switch (*)
Plays tracks backwards when set to the [REV] position (forward position).
39 HOT CUE REC MODE button (*) ☞ P.14
Switches HOT CUE button function (REC/CALL).
¶ It is set to call when the power is turned on.
40 HOT CUE A, B, C button/indicator ☞ P.14
It is set to hot cue point recording mode when A, B and C light in red.
It is set to call mode when A, B and C light in green. When the button is
pressed, playback starts from the hot cue point. It is off when no hot cue point
has been recorded.
BEFORE OPERATIONS: PANEL FACILITIES
28 Force Ejection Hole ☞ P.5
29 Memory Card Loading Slot ☞ P.16
30 Memory Card indicator ☞ P.16
Lights when the MMC card is being accessed.
¶ Do not remove the card or turn off the power when this lamp is on.
31 Play/Pause indicator
Lights during play and flashes during pause.
32 PLAY/PAUSE button (
6) ☞ P.11
33 CUE indicator (*) ☞ P.12
Lights when a Cue point is set and a search is not being performed. Flashes in
pause mode.
34 CUE button (*)
Cue point settings ☞ P.12
Cue point sampler ☞ P.13
Back cue ☞ P.13
65 Wave/Text display
When WAVE is displayed the music level of the current track.
The level is indicated either in 1-track full scale, or zoom when only part of the track is
shown. In the zoom mode, the display area is moved using the WAVE SEARCH (ZOOM)
buttons (
2, 3).
CD TEXT will be displayed in the TEXT mode.
The contents of the display is the disc title and track title in English up to a maximum of 48
letters which can be scrolled.
66 Playback Address display
Indicates elapsed playback time and remaining playback time in an easy to grasp 1-
track full scale or 2x zoom scale bar graph.
¶ The 1-track full scale mode shows elapsed time by lit segments from the left.
¶ The 1-track full scale mode shows remaining time by unlit segments from the left.
¶ When the remaining time is 30 seconds or less, the display flashes gently and the
flashing becomes faster when there is 15 seconds or less left.
¶ In the 2x zoom scale mode, only the playback position is lit for the WAVE display.
67 BPM Counter
Indicates BPM for the current track.
The BPM counter may sometimes not be able to measure the BPM of a track.
68 EJECT LOCK indicator
Lights when the EJECT UNLOCK/LOCK switch is set to the [LOCK] position.
69 Master Tempo indicator (MT)
Lights when the master tempo function is on.
Jog Dial Display
81 84
85
82 83
81 Operation display
Indicates play position in frames 135 frames for one full rotation. Turns dur-
ing playback and stops during pause.
82 Cue point position indicator
Indicates the current cue point position.
83 Display the condition of the audio memory
When set in the audio memory display mode the light will flash when record-
ing.
84 Jog touch detection indicator
In the VINYL mode, this indicator lights when the surface of the Jog dial is
pressed.
85 VINYL mode display.
Lights up in the VINYL mode.