Philips CCZ092AT - Manual (Page 44)

REW
PLAY
POWER
SPEED MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
TRACKING
STOP
F.FWD
o
o
p
p
o
p
o
p
1 2 3
4 5 6
7 8 9
0 +100
44 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on-screen.
3
While the counter remains on-screen, press the CLEAR
button to reset the real-time counter to zero.
4
While the counter remains on-screen, press the MEMO-
RY button so that M appears on-screen. To erase a real-
time counter memory, press the MEMORY button so that the M
disappears from the screen.
01:08 PM STOP
CH10
SLP 1 : 23 : 45
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/ s button or the
F.FWD/ B button when playback is stopped. When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/o button to
watch the tape.
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 41.
• You may only set one real-time
counter memory at a time. If you
try to set the real-time counter to
zero at a second location, the previ-
ous real-time counter to zero setting
will be lost.
Helpful Hints
0 : 00 : 00
M 0 : 00 : 00
2
4
3
1,5
CCZ092comb.QX33 4/5/99 6:06 PM Page 44