PYLE Audio PDCD6000MP User Manual

Page 5

- 4 -

1. UNIT 1-CONTROL OPERATION PANEL

This operation panel remotely controls the main unit 1.

2. UNIT 2- CONTROL OPERATION PANEL

This operation panel remotely controls the main unit 2.

3. EJECT BUTTON

Press to eject the disc.

Note: Disc can’t be ejected unless the stop or pause

button has been pushed first.

4. MAT RIX L.C.D

Display the details of music data, please refer to the LCD

instruction (page 6)

5. CONT./SINGLE BUTTON ( OUTRO)

To press this button it can switch between auto cue

single and continue. The selected mode is indicated on

the display.

*AUTO CUE SINGLE - After each track, the unit pauses

at the beginning of next track. The playback starts from

audible point.

*CONTINUE -To play all tracks continually.

OUTRO - The unit will play the last 30 seconds of each

track

Press the button for 3 seconds to switch OUTRO

function.

Note: OUTRO is not available for MP3 music.

6. T IME / ST OP BUTTON

This button switches the time display between total

remaining time, each remaining time and elapsed
playing time. The unit will be in the

“

stop

”

mode if you

continue pressing the button for 3 seconds.

7. SEARCH BUTTON

Pressed the button to switch the function of Jog Dial
between SE ARCH and P ITCH BEND.

When the indicator LE D is light, dial the jog for quick

search forward and backward.

When the indicator LED is off, dial the jog for pitch

bend function.

If the jog is unmoved for 8 seconds, the indicator is off,

and the jog is for pitch bend function.

8. TRACK BUTTON

These buttons select the track to be played.

+10 BUTT ON

Pressed the button to forward 10 tracks. If you forward 10
tracks, and the tracks over total tracks, the unit will jump to
track 1...

10. PLAY/ PAUSE BUTTON

Each press of this button causes the operation to change
between PLA Y and PAUS E modes.

11. CUE BUTTON

The cue function allows the CD returning to the memorized

point. In PA USE mode, pressing the CUE button to set the cue
point, and the CUE button blinks; in PLAY mode, press this
button to pause the unit at the memorized point.

12. BOP BUTT ON

The playback will automatically play from the CUE point upon
the button is pressed.

13. PITCH BUTTON

Select the pitch change range from

8%,

16%,

32%,

100%. The playback speed will change when you move the

pitch control slider.

14. PITCH CONTROL SLIDER

To match the choices of playback speed (8%, 16%, 32%,
100%), you can choose what range you want between
minimum (up side) and maximum (bottom side) by moving the

pitch control slider.

15. PITCH BEND + / - BUTTON

When each of the two CD players is playing, the pitch bend
function allows the position of the bass beat to be matched
after the pitch has been adjusted. The pitch will automatically
rise up to + 16% from the current setting while pressing the

“

button. While pressing the

“

–

“

button, the pitch will

automatically drop to - 16 % from current setting. By the way of
changing the pitch the position of the beats can be matched.