Switching the modulator on / off, Suppressing interference – Philips VR620/07 User Manual
Page 60
56
7
Confirm with OK .
'STORED' will appear briefly on the screen.
Optimising the modulator is now complete.
Switching the modulator on / off
If you cannot clear picture or sound interference despite optimisation, you can switch off the
built-in modulator.
Warning:
this is only possible if you have connected the video recorder to the TV set with a
scart cable. Without a scart cable you will not receive a picture from the video
recorder on the TV set when the modulator is switched off.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press STOP/EJECT ? to eject any cassette that might be in the
device.
3
Hold the STOP h button on the remote control.
4
In addition press the STOP/EJECT ? button on the video
recorder until the modulator frequency appears on the screen, e.g.
'
M583' (583MHz or UHF channel 35).
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY
583
p
MODULATOR
ON
________________________________
EXITpMENU
STOREpOK
5
Select the line 'MODULATOR' on the TV screen or '
MOD+' in the
display with ;qP or P r= .
6
Select 'OFF' on the TV screen with Q or in the display '
MOD-'
(modulator off).
How can I switch the modulator back on?
In the display, select '
MOD+' (modulator on) with
Q
.
7
Confirm with OK .
8
To end, press MENU .
Suppressing interference