Philips VR620/07 - Manual (Page 16)

12
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a commercially
purchased or hired decoder without disturbances. You can connect such a decoder
(descrambler) to this video recorder. The following function will automatically activate the
connected decoder for the desired TV channel.
1 Switch the TV on. If applicable, select the programme number for the
video recorder operation.
2
Use the buttons ;qP , P r= on the video recorder or the number
buttons 0-9 on the remote control to select the TV channel which
you would like to allocate the decoder to.
3 Press the button MENU on the remote control. The main menu will
appear.
4
Use the buttons ;qP or P r= to select the line 'MANUAL
SEARCH' and confirm with OK .
MANUAL SEARCH
PROGRAMME NUMBER è P01 p
S-CHANNEL NO
CHANNEL NUMBER 21
DECODER OFF
NICAM ON
________________________________
EXITpMENU
STOREpOK
5 Use the buttons P r= or ;qP to select the line 'DECODER'.
6 Use the buttons Q or P to select 'ON' (Decoder switched on).
How can I switch off the decoder?
Use the button P on the screen to select 'OFF' (Decoder switched off).
7 Confirm with OK .
8 End with the button MENU .
BBC1 The decoder has now been allocated to this TV channel.
If this TV channel is chosen, the symbol 'DEC' will appear in the video recorder display.
Installing your video recording