Philips ADAT-4 - Manual (Page 16)

ADAT-4 User Guide Page 10
Audio Specifications (continued)
AES3ID Synchronization Output
Amplitude 1 ±0.2 V p-p
Rise time 37 ±7 ns
Output impedance 75 Ω
Return loss >15 dB (0.1–6 MHz)
DC on output <50 mV
Word Clock Synchronization Output
Amplitude V
LO
<0.5 V at I
OUT
= -5 mA
V
HI
>4.5V at I
OUT
= 5 mA
Waveform Square-wave at Fs
Phasing + edge coincident with audio sampling instant. Use jumper J5 to invert.
Options
RT-2, 1RU rack tray for mounting up to 3 units
Power supplies:
PSU-1, 90-260V 50/60Hz in-line power supply with detachable IEC power cord
NOTE All specifications listed above subject to change without notice.
Environmental Specifications and Dimensions
Parameter Specification
Dimensions
(less connectors) 5.2W x 1.62H x 6.625D
13.2 x 4.1 x 16.8 cm
Power <200 mA @ 6 Vdc
Operating Temp 10 – 50 ° C
Operating
Humidity 10 – 90% RH non-condensing
Channel Routing
The table below lists ADAT-to-digital channel routing in the ADAT-4:
ADAT Input Track AES Output
1, 2 → 1
3, 4 → 2
5, 6 → 3
7, 8 → 4