Philips ADAT-4 - Manual (Page 14)

ADAT-4 User Guide Page 8
SW2 is the Status Dip Switch which is used to set the channel status on all AES outputs,
including the SYNC output (provided that the Sync Switch is set to AES). The switch is an eight-
position DIP, of which five switches are active.
1 2 3 4 5 6 7 8
OPEN
1 (closed) top position
0 (open) bottom position
For all switches:
~ 0 is open
~ 1 is closed
~ The default setting is all 0’s
• Switches 1 and 2 determine the Emphasis.
Function SW1 SW2
Not Indicated 0 0
None 1 0
50/15uS 0 1
J.17 1 1
• Switches 3 and 4 determine the Sample Frequency.
Function SW3 SW4
Not Indicated 0 0
48 kHz 0 1
44.1 KHz 1 0
32 KHz 1 1
• Switch 5 determines the Stereo Mode.
Function SW5
Not Indicated 0
Stereo 1