PYLE Audio PYLE PRO PMX802M - Manual (Page 6)

B.BACK PANEL SECTION FEATURES
1. SPEAKER JACK
These are 2 conductor 1/4” speaker outputs. Each one is rated at 8 ohm minimum
impedance. Total minimum load for the amplifier is 4 ohms. You may connect either
1-4 ohm,1-8 ohm or 2-8 ohm speaker cabinets. Do not below rated minimum
impedance.
2. SEND/RETURN
Use a stereo ¼” plug to send and return a preamp signal to a sound processor
3-4.TAPE IN AND REC OUT
The TAPE IN allows cassette recorders or CD players to be added to the Main output.
The RECORD OUTPUT, with TAPE RCA jacks, provides signal output to a cassette
deck or Home audio equipment. The impedance is 1K ohms @ -10dBv.
5. FAN
In order to prevent rising the inside temperature, the inside heat is emitted outside.
6. POWER SWITCH
Turns the unit ON or OFF. Always turn level controls down before turning on the
unit.
___________________________________5___________________________________