Polycom SpectraLink 1725-36203-001 - Manual (Page 30)

User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
30 1725-36203-001-F.doc
PTT Vibrate
To enhance the alerting of a PTT call, PTT Vibrate may be enabled.
When PTT Vibrate is enabled, the handset will vibrate three times
whenever a PTT broadcast is received, whether the handset is in
standby or in a call. If in a call, the chirp alert will also sound. The
vibration does not replace any PTT tone volume already set.
To set the handset for PTT vibrate only, enable
PTT Vibrate and set the
tone volume to zero.
System Info
Displays the IP address of the highlighted menu item. The IP address
appears in the upper portion of the screen below the words
System
Info .
Phone IP Address
Displays the IP address currently assigned to the handset by the SVP
Server.
Gateway IP Address
Displays the IP address used by the SpectraLink Telephony Gateway
which operates as a call administrator between the handset and the
PBX.
Firmware Version
Displays the software version running the handset. The MAC address
is the hardware identification number and is set at the factory. Three
code numbers correspond to the three software files that each
software version uses.