Panasonic DMP-B500 - Manual (Page 48)

VQT2J81
(ENG)
48
No sound from the unit’s speaker.
¾ The speaker is off if headphones are connected.
¾ Turn up the volume. (> 14)
Cannot hear the desired audio type.
¾ Press [AUDIO] to select the audio. (> 17)
¾ [DivX]: Audio may not be output depending on how files were
created. ( > 42)
Cannot switch audio.
¾ There are discs for which audio cannot be changed because
of how the disc was created.
The images from this unit do not appear on the
television.
Picture is distorted.
¾ Make sure that the television is connected to HDMI AV OUT
terminal on this unit. ( > 28)
¾ Make sure that the television’s input setting (e.g., VIDEO 1) is
correct.
¾ When “24p Output” is set to “On”, HDMI authentication takes
place where 24p images switch to other images, and a black
screen is displayed. (
> 38)
¾ When “24p Output” is set to “On”, jittering may occur while
playing DVD-Video other than 24p images. In this case, turn
“24p Output” to “Off”. (
> 38)
¾ An incorrect resolution is selected in “HDMI Resolution”,
when the television is connected to HDMI AV OUT terminal.
Set the item again.
¾ Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Video is not output in high definition.
¾ Confirm that the “HDMI Resolution” in the Setup menu is set
properly. ( > 38)
Audio is not output in bitstream.
¾ Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not
output in bitstream. To output the bitstream, select “Restore
Default Settings” to restore the factory presets and make
proper settings.
The 4:3 aspect ratio picture expands left and right.
Screen size is wrong.
¾ Use the television to change the aspect. Refer to your
television’s operating instructions.
¾ When using an HDMI cable, change “TV Aspect” type to “4:3
Pan & Scan”. ( > 38)
No sound from other speakers.
¾ Check all connections and settings. (> 28)
Cannot hear the desired audio type.
¾ Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Cannot switch audio.
¾ When connecting an amplifier/receiver using an HDMI cable,
you cannot switch the audio if “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby
D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.
(
> 37)
The capacity of the SD card decreased.
¾ When a BD-Video that supports BD-Live is used, and an SD
card is in the slot, data may be written to the SD card. ( > 18)
Music on an SD card cannot be played.
¾ Data that can be played from an SD card are AVCHD,
MPEG2 and JPEG data. ( > 7)
The contents of the card cannot be read.
¾ The card is not compatible or the contents on the card may
be damaged. ( > 7)
¾ Turn off and then turn on the unit again.
Still picture or motion picture does not display.
¾ Check that the SD card is inserted. (> 13)
¾ It is not a format compatible with this unit. Or, the contents of
the SD card may be damaged. ( > 7)
¾ Playback of still pictures and motion pictures that were edited
with a PC etc. may not be possible.
Sound
Connection
Card
Photo Frame
DMPB500PP-VQT2J81_eng.book 48 ページ ２０１０年３月１６日 火曜日 午後４時８分