Philips SPC600NC/37 - Manual (Page 9)

Connecting the camera to your PC
1 Be sure to run the installation CD first, before connecting the camera to the PC.
2 Turn on the PC.
3 Connect the USB plug of the USB cable to a USB port of the PC.
4 Insert the camera’s USB connector into the USB port of the docking base/stand. Push it down
gently until it clicks into position.
> The camera will now derive its power from the PC.
ENGLISH 9
SPC600NC_1. English.qxd 01-09-2005 10:50 Pagina 9