Lincoln Electric PRECISION TIG 185 - Manual (Page 22)

C-1 ACCESSORIES C-1
FACTORY INSTALLED OPTIONS
The PRECISION TIG 185 will be available in two
Factory-Configured Welding Packages:
1. Precision TIG 185 Ready-Pak (K2347-1)
• 208/230/1/60 Machine (K2345-1)
• 9 ft. (2.7m) Input Cable with NEMA 6-50P Plug*
• NEMA 6-50R Receptacle
• Integrated 10 ft.(3.1m)Work Lead w/Clamp*
• Gas Regulator with 10 ft.(3.1m). Hose
• PTA-17 12.5”(318mm) Ultra=Flex Torch with
3/32”(2.4mm)Electrode and Parts
• Foot Amptrol (K870)
• TIG Slide Rule ( WC332)*
• GTAW Book (JFLF-834)*
• Lift Eyebolt*
The PRECISION TIG 185 will also be available as
Basic models with Domestic input voltages for user-
configuration with optional accessories: (See Table
C.1)
2. PRECISION TIG 185 Ready-Pak w/Cart (K2347-2)
• 208/230/1/60 Machine (K2345-1)
• 9 ft.(2.7m) Input Cable with NEMA 6-50P Plug*
• NEMA 6-50R Receptacle
• Integrated 10 ft.(3.1m) Work Lead w/Clamp*
• Gas Regulator with 10 ft.(3.1m) Hose
• PTA-17 12.5 ft.(3.8m) One cable Superflex Torch
with 3/32”(2.4mm) Electrode and Parts
• Foot Amptrol (K870)
• TIG Slide Rule (WC332)*
• GTAW Book (JFLF-834)*
• Lift Eyebolt*
• Under-Storage Cart (K2348-1)
* Included with K2345-1 Machine Only model.
PRECISION TIG 185
Water Cooled System
K2267-1 TIG-Mate 20 Torch Starter Kit
Includes:
• 200A PTW-20 12.5 ft.(3.81m) Torch
• KP510 Parts Kit
• Regulator & Hose
• K1622-4 Twist Mate Torch Adapter
• Water Hose & Hose Coupler
• Work Cable & Clamp (Not required for
Precision TIG 185)
K1813-1 115V 50/60Hz Cool-Arc 40
Select Machine
Optional
Torch Starter Kit
(Select one)
Water Cooler
Optional Under-
Storage Cart
Optional Remote
Trigger Device
(Select one)
208/230/1/60 Machine with 9 ft.(2.7m) NEMA 6-50P Plug Cable and Receptacle (K2345-1)
460/575/1/60 Machine only with Cable (K2345-2)
380/400-415/1/50-60 Machine only with Cable (K2346-1)
Air Cooled System
K2266-1 TIG-Mate Torch Starter
Kit Includes:
• 150A PTA-17 12.5 ft.(3.81m) Torch.
• KP508 Parts Kit.
• Regulator & Hose.
• K1622-1 Twist Mate Torch Adapter.
• Work Cable & Clamp (Not required for Precision
TIG 185)
Not Applicable
TABLE C.1
K2348-1
K814 Arc Start Switch
K870 Foot Amptrol
K870-1 Start Pedal Foot Amptrol
K963-3 Hand Amptrol