Linksys EFG120 - Manual (Page 52)

45 Appendix C: Setting Up the Built-in PrintServer
EtherFast Network Attached Storage (120GB with PrintServer)
9. Because you are adding this printer to your network, select Network printer and click the Next button.
10. On the Locate Your Printer screen, select Type the printer name, or click Next to browse for a printer. In
the Name field, enter the location in this format: \\Lkg(last six digits of the server name located on the
back of the Network Attached Storage)\Lkg(last six digits of the server name located on the back of
the Network Attached Storage)_p1. This is the default format used to locate the printer.
For example, if the last six digits of the server name are 0F0016, then you would enter
\\Lkg0F0016\LKG0F0016_p1.
After you have entered the location of your printer, click the Next button.
11. You will be asked to install a printer driver. Click the OK button to do so now.
Figure C-5: Local or Network Printer Screen
Figure C-6: Locate Your Printer Screen
Figure C-7: Need Printer Driver Installed