La Crosse Technology WT-5442 User Manual

Page 7

D. DST (DAYLIGHT SAVING TIME) SETTING

Note: The DST default is “On”, meaning that the WWVB will automatically
change the time according to Daylight Saving Time in the spring and fall.
For areas that do not recognize DST changes (Arizona and parts of
Indiana) turn the DST “OFF”.

1. Hold down the “SET” button for 1 second (the selected time zone will

flash); press the “SET” button once more until “On” flashes in the lower
left and “DST” flashes in the upper right.

2. Press and release the “Mode/+” button to turn the DST off, as will be

indicated by the display of “OFF” in the time LCD.

Note: Only turn the DST setting off if you live in an area that does not
change time for Daylight Saving Time.
3. Press and release the “SET” button to confirm the DST setting, and to

advance to select the length of the snooze.

E. ADJUSTABLE SNOOZE TIME

Note: The snooze length can be adjusted from 1 minute to 59 minutes.
This duration refers to the length of time the alarm will be disabled when
the “SNOOZE” bar is pressed. If set to “0”, activating the snooze will turn
off the alarm for 24 hours.

1. Hold down the “SET” button for 1 second (the selected time zone will

flash), press the “SET” button 2 more times, until “Sno” appears in the
lower left and duration (“:10” default) flashes in the time LCD.

2. Press and release the “Mode/+” button to advance the snooze time

from 0 (off) to 59 minutes.

3. Press and release the “SET” button to confirm the snooze setting, and

to advance to manually set the time.

F. TIME SETTING

Note: When the WWVB signal is found, that time will over-ride the
manually set time.

1. Hold down the “SET” button for 1 second (the selected time zone will

flash), press the “SET” button 3 more times, until the hour flashes in
the time LCD.

2. Press and release the “Mode/+” button to select the hour. Note: when

setting the hour, “PM” will appear to the left of the hour display, if it is
AM nothing will be displayed.

3. Press and release the “SET” button to confirm the hour setting, and to

advance to select the minutes.

4. Press and release the “+” button to select the minutes.