La Crosse Technology WT-5442 - Manual (Page 6)

A. PROGRAMMING SEQUENCE
Default (Factory) Setting
1. Time Zone Setting -5 (eastern standard time)
2. Daylight Saving Time ON/OFF ON
3. Adjustable Snooze 10 Minutes
4. Hour Setting 12: AM
5. Minute Setting :00
6. Year Setting 01 (2001)
7. Month Setting 1 (January)
8. Date Setting 1
9. Day Setting MO (Monday)
10. 12/24-hour Mode 12-hour
B. FUNCTION BUTTONS
There are 8 function buttons; three on the
front, four on the back and one on the top of
the projection alarm. The function buttons
are labeled: ALM1/HOUR, ALM2/MIN, light
intensity icon, DISPL, light direction icon,
SET, MODE/+, and SNOOZE (the top bar).
C. TIME ZONE SETTING
1. Hold down the “SET” button for 1 second, the time zone (“-5” default)
will flash in the Date LCD.
2. Press and release the “Mode/+” button to select the appropriate time
zone. There are 13 time zones to choose from based relative to the
international time standard of GMT (“Greenwich Mean Time”)(shown
as “0h” on display).
3. From –5h to –8h, a US map with the highlighted time zone will also be
displayed to the right of the time display.
4. Press and release the “SET” button to confirm the time zone setting,
and to advance to DST (Daylight saving time) setting.
-4h Atlantic Time
-5h Eastern Time (default setting)
-6h Central Time
-7h Mountain Time
-8h Pacific Time
-9h Alaskan Time
-10h Hawaiian Time
-11h, -12h Next two time zones West of HAW
0h Greenwich Mean Time
-1h, -2h, -3h Three time zones West of GMT
6