Lindy PRO-300 - Manual (Page 25)

English Manual
LINDY KVM Extender C5 PRO-300 Installation and Use page 25
1
Disconnect all cables from the REMOTE module and take it to the computer.
2
Use a ‘KVM switch-type’ keyboard
cable (6 pin mini-DIN male to 6 pin
mini-DIN male plugs with all lines
connected) – not supplied. Attach
one end of the cable to the keyboard
port of the computer. Connect the
other end of the cable to the
keyboard port of the REMOTE
module. This is the only connection
required.
3
On the REMOTE module, change
switch 1 to the ON position.
4
Attach the power supply unit to the
POWER input of the REMOTE
module and connect the mains lead
to a nearby wall socket.
5
Switch on the computer. The upgrade
process will start automatically and confirmation will be given on screen.
6
Switch off the computer and disconnect the REMOTE module. Return REMOTE switch 1 to the OFF
position.
6.5 Return all connections to their usual states
Once the upgrade process has been completed, perform the following to return the system to its previous state.
1
Ensure that switch 1 on both the LOCAL and REMOTE modules is set to the OFF positions.
2 Refer
to section 3 ‘Connections’ for detailed instructions on correctly connecting the LOCAL and
REMOTE modules to the computer, its peripherals, the REMOTE power supply and the twisted-pair
cable.
3 Remove the diskette from the system and reboot. The upgrade process is now complete.