English manual – Lindy PRO-300 User Manual
Page 17
English Manual
LINDY KVM Extender C5 PRO-300 Installation and Use
page 17
5.3 Entering, using and exiting configuration mode
To enter and use configuration mode:
1
Simultaneously press the currently configured hotkeys
(by default,
The three keyboard indicators (‘Num Lock’, ‘Caps Lock’
and ‘Scroll Lock’) will now begin to flash in sequence to
show that you are in configuration mode.
2
Press the first letter of the required configuration option,
for instance
All three keyboard indicators will illuminate continuously.
3
Press the number of the required configuration option, for
Instance <8>
The ‘Scroll Lock’ indicator will extinguish, leaving the ‘Num Lock’ and
‘Caps Lock’ indicators lit.
4
Press
The three keyboard indicators (‘Num Lock’, ‘Caps Lock’ and
‘Scroll Lock’) will now begin to flash in sequence again.
To exit from the configuration mode:
1
Within configuration mode, the three keyboard indicators should be flashing in sequence to show that
the module is ready to receive a new command.
2 Press
The three indicators will return to their normal states.
5.4 Password setting
Password protection allows you restrict access to the system only to authorised personnel. A password first
needs to be set and then, using the keyboard attached to the REMOTE module, a simple key sequence allows
the system to be quickly and securely detached from its peripherals.
To set a password
1
Simultaneously, press the hotkeys (by default,
configuration mode.
2
Press
followed by
3
Now enter your new password, within the following constraints:
• Passwords are NOT case sensitive,
• Passwords may be any length from 1 character to a maximum of forty characters,
• The following keys may NOT be used:
4
When you have entered the password, press
5
Press
For full details about how to lock and unlock the system using your password, please
see section 4.2 ‘Locking and unlocking the system.’
Num
Loc
k
Caps
Loc
k
Scroll
Loc
k
Nu
m
Lo
ck
Ca
ps
Lo
ck
Sc
roll
Lo
ck