Logitech Harmony 650 User Manual
Page 16
12
LOGITECH HARMONY 650 USER MANUAL
Testing your remote
Every time you update your Harmony 650, you should test your remote to ensure it’s
working the way you expect. This section gives you the information you need to test
your remote. It also has some suggestions on what to check while you’re testing your
setup.
If you run into specific issues while testing your remote, see
Troubleshooting problems
with your Harmony 650
on page 17 for suggestions and possible fixes for your
problems.
Testing your Harmony 650 is simple. Just try out the Activities you use most often and
use the on-remote help to correct any issues.
In some cases, you may need to return to My Harmony to make changes to your
remote’s setup to ensure the remote is working the way you want.
To begin testing your remote:
Disconnect the USB cable from your remote.
1.
If this is the first time you’ve updated your remote, the Harmony 650’s tutorial will appear
on the remote’s screen.
Ensure all the devices in your entertainment system are turned off.
2.
If you are viewing the tutorial, follow the instructions displayed on the remote’s screen.
3.
Go to your entertainment system and try each of your Activities.
4.
For tips on what to look for when starting an Activity, or switching between Activities, see
below.
If an Activity doesn’t start correctly, press the
5.
Help button on the remote and the on-
remote help will get you back “in sync”. After you finish testing your Activities, be sure
to re-test any for which you had to use the Help button.
Testing your setup – Starting an Activity
Look for these things in particular:
Did all of your devices for that Activity turn on?
•
Do you hear the correct sound?
•
If the Activity includes your TV, do you see the correct picture?
•
Testing your setup – Switching between Activities
Look for these things in particular:
Are all devices needed for this new Activity on?
•
Did devices not needed for this Activity turn off?
•
Do you hear the correct sound?
•
If the Activity includes your TV, do you see the correct
•
picture?