Lenovo S300 - Manual (Page 12)

8
Chapter 2. Learning the basics
„
Putting your computer into sleep state or shutting it down
When you finish working with your computer, you can put it into sleep state
or shut it down.
Putting your computer into sleep state
If you will be away from your computer for only a short time, put the
computer into sleep state.
When the computer is in sleep state, you can quickly wake it to resume use,
and bypass the startup process.
To put the computer into sleep state, click and select Sleep from the Start
menu.
To wake the computer, do one of the following.
• Press the power button.
• Press any key on the keyboard.
Shutting down your computer
If you are not going to use your computer for a day or two, shut it down.
To shut down your computer, click and select Shut down or Smart
Shutdown
from the Start menu.
Note: Wait until the power indicator light starts blinking (indicating that the computer is
in sleep state) before you move your computer. Moving your computer while the
hard disk is spinning can damage the hard disk, causing loss of data.
Note:
•
By selecting Smart Shutdown instead of Shut down or Hibernate, you make your
computer start more quickly next time you turn it on.
• For installed system updates to take effect, do not select Smart Update. Select Shut
down
or Restart instead.