beautypg.com

System indicator lights, Using the electronic shift 4wd system, Shifting between 2h (2wd high) and 4h (4wd high) – Lincoln 2008 Mark LT User Manual

Page 231: Shifting to/from 4l (4wd low), Driving

background image

System indicator lights
4X4 HI - Momentarily illuminates

when the engine is started.
Illuminates when 4H is selected.

4X4 LOW – Momentarily

illuminates when the engine is
started. Illuminates when 4L is
selected.

Using the electronic shift 4WD system

2H (2WD High) - Power to the rear wheels only; used for street and
highway driving. Provides optimal smoothness and fuel economy at high
speeds.
4H (4WD High) - Used for extra traction such as in snow or icy roads
or in off-road situations. Not intended for use on dry pavement.
4L (4WD Low) - Uses extra gearing to provide maximum power to all
four wheels at reduced speeds. Intended only for off-road applications
such as deep sand, steep grades or pulling heavy objects. 4L (4WD Low)
will not engage while the vehicle is moving above 3 mph (5 km/h); this is
normal and should be no reason for concern. Refer to Shifting to/from
4L (4WD Low)
for proper operation.
Shifting between 2H (2WD High) and 4H (4WD High)
• Move the 4WD control between 2H and 4H at any forward speed up to

55 mph (88 km/h).

Note: Do not perform this operation if the rear wheels are slipping.
Note: Some noise may be heard as the system shifts or engages; this is
normal.
Shifting to/from 4L (4WD Low)

1. Bring the vehicle to a complete stop
2. Place the transmission in N (Neutral).

4x4 HI

4x4

LOW

2008 Mark LT (mlt)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

231