Linn CLASSIK Movie Di - Manual (Page 19)

13
English
V
ideo Output / S
etup M
enus
Video Output
The output video signal that is correct for your TV can be selected using the FORMAT
key on the front panel.
To do this:
● Repeatedly press or hold SOURCE +/SOURCE – on the front panel until the
display shows LISTEN DISC / RECORD OFF.
● Repeatedly press FORMAT to select the required format (either PAL, NTSC or
MULTI if your TV accepts both PAL and NTSC).
● With the required format showing on the front panel display, press and hold
FORMAT until the display changes to show one of the video signal types (either S
VIDEO, COMPOSITE, YPrPb, or RGB*).
● Repeatedly press FORMAT until the required video signal type is shown on the
display.
● Wait a few seconds for the display to change to the LISTEN DISC / RECORD OFF
display.
*RGB is not available on the US version of the CLASSIK Movie System Di.