Life Fitness GS1 - Manual (Page 11)

FIGURE 12
STEP 12:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two STEP SPACERS 19/32” (11) and one 3/8” LOCK NUT (6) as shown in FIGURE
12. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
3
2
6
11
MAIN ARM
FIGURE 11
STEP 11:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3)
to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-19/32” (12), and one 3/8” LOCK NUT (6) as shown
in FIGURE 11. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-3/4” 10
3
2
6
12
3/8” LOCK NUT
11
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
SEAT FRAME