Linn IKEMI & GENKI - Manual (Page 16)

8
Replacing the fuses
Before replacing the fuse identify the correct fuse for your local
voltage:
• 100V: T800mA
• 115V: T800mA
• 230V: T800mA
The fuse compartment is on the mains inlet module to the left of
the voltage selector.
Disconnect the mains supply by removing the IEC mains cable from
the mains inlet module. Using a flat blade screwdriver remove and
replace the fuse. If the fuse blows a second time there is a fault in
the product. Contact your local retailer.
Earthing.
This product must be earthed, Use the three wire moulded mains
lead supplied. Never use an unearthed plug or adaptor.