Lucent Technologies Cajun Switch P220 - Manual (Page 37)

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 37
Port Commands
Table 1-13 shows new and changed Port Commands in Release 4.0.1:
Table 1-13: Port Commands
Old Command New Command New Definition/Argument
N/A show ethernet counters
[{|
swport-spec>}]
Display ethernet interface statistics.
• – specifies the chassis
module number of the switch
ports that are to have their
ethernet statistics displayed. (Valid
on 550 and 550R only)
• – specifies
a particular switch port whose
specific ethernet statistics are to be
displayed.
If no or spec>
is specified then ethernet inter-
face statistics is displayed for all ports
on all modules in the chassis.
If is specified then all
switch ports on that module have their
ethernet interface statistics displayed.
If is specified
that particular port's ethernet interface
statistics are displayed.
Command Mode: User
N/A show ethernet counters
history
interval>
Display interface ethernet history sam-
ples.
• – specifies the chassis
module number of the switch
ports that are to have their
ethernet statistics displayed. (Valid
on Cajun P550 and P550R only)
• – specifies
a particular switch port whose
specific ethernet statistics are to be
displayed.
• The
history sample interval.
If no or spec>
is specified then ethernet inter-
face statistics is displayed for all ports
on all modules in the chassis.
If is specified then all
switch ports on that module have their
ethernet interface statistics displayed.
If is specified
that particular port's ethernet interface
statistics are displayed.
Command Mode: User