Lanier 5227 - Manual (Page 86)

Message List
6 - 26 Additional Functions
When Using SNMP
Item Name Description
Exit snmpd The agent is complete. Reset the printer
or turn the printer off and on.
recvfrom: packet discarded, length
(reception packet length) > (Packet
size), from addr The received packet was ignored since
the length of the packet exceeds the
limit. Confirm whether the administrator
station sent a packet whose length is
longer than 1025 bytes.
session
Name> from The community name of the received
packet is not defined. Confirm that the
community name of the administration
station is the same as that specified to
the printer.
snmpin: Bad use of session
from The community name of the received
packet is not the same as that of the
administration station. Confirm the
community name specified to the
printer.
snmpin: error in snmpdecipher, code
() An error occurred on the received
packet. Check if the number of the
objects sent from the administration
station ism ore than 31 and if there are
wrong MIB requests.
snmpin: error in snmpservsend, code
() Cannot send a response packet.
Normally this message is followed by
other messages.
snmpin:pkt too large,code (number>) The response packet to the request is
too big to send. Reduce the number of
the objects per request.
snmpin: error in sending too large
request back,code (number>),giving up The packet notifying the error is too big
to send. Reduce the number of the
objects per request.
snmpin:received bad version The version of the received packet is
invalid. Confirm that the version of the
administration station is the version -
1(0).