Lanier 5227 - Manual (Page 72)

Remote Maintenance by Telnet (mshell)
6 - 12 Additional Functions
Status of Printer
The following commands can be used to get information about the current status of the printer.
msh> command
Note:
•
More information on the print job is displayed when the ID number is added after the
prnlog command.
5
Information about the Network Interface Card Configuration Settings
Use the show command to display the Network Interface Card configuration settings.
msh> show [-p]
Note:
•
Add “-p” to the show command to have the information displayed one screen at a time.
System Log Information
Use the syslog command to display information stored in the printer's system log.
Note: msh> syslog
Command Information that is
Displayed
status Status of printer.
Information about the print
job.
info Information about the paper
tray, output tray, emulation
and program of printer.
prnlog (ID) Lists the last 10 print jobs
netstat Information on NIC