2designing the kitchen cabinet, Kitchen cabinet construction, 2 designing the kitchen cabinet – Liebherr HC1001 User Manual
Page 5
Fig. 6
u
In the cabinet base, cut out a ventilation opening that is
17-23/32 in. (450 mm) in width and 2-7/32 in. (56 mm) in
height.
u
Insert ventilation grille
Fig. 6 (3)
into the cabinet base cut-
out
Fig. 6 (1)
.
u
From the back side, slide the snap-fits
Fig. 6 (2)
into the
grille until the hooks make contact with the cabinet base.
u
Completely mount cabinet base (with ventilation grille
and snap-fits) to kitchen cabinet.
4.2 Designing the Kitchen Cabinet
Install the appliance in stable kitchen cabinets only.
Fig. 6
1
Power cord
3
Electrical outlet
2
Level
4
Fish line for power cord
A
21-7/32 in. (539 mm)
B
69-21/32 in. (1769.5 mm)
C
21-15/16 in. (557 mm)
D
69-3/4 in. - 70-3/8 in. (1772 mm) - (1788 mm)
E
24 in. (609.6 mm) (American Style Cabinet)
F
21-21/32 in. (550 mm)
23-5/8 in. (600 mm) (European Style Cabinet)
G
1-1/2 in. (38 mm)
H
27-3/8 in. (695 mm)
J
24-3/4 in. (629 mm)
K
max. 3/4 in. (19 mm)
L
9-21/32 in. (245 mm)
u
Construct the kitchen cabinet using the dimensions
shown in
Fig. 6
.
u
Align the kitchen cabinet with a level
Fig. 6 (2)
and a
square. If necessary, shim underneath the cabinet to
make it level.
Kitchen Cabinet Construction
5