Land Pride Accu-Z Razor 357-187M User Manual
Page 48
46
Section 7: Features and Benefits
Z44 & Z52 (S/N 526171 & Above) Accu-Z Razor
®
Zero Turn Mowers 357-187M
7/22/10
Section 7: Features and Benefits
Z44 & Z52 Accu-Z Razor
®
(S/N 526171+)
Features
Benefits
44” or 52” Cutting width
Sized and priced right for residential owners.
Ground speed
Forward 0-7.5 mph and Reverse 0-5.5 mph for high mowing productivity
Mid-mount deck design
Mid-mount design puts the deck closer to the operator’s line of sight for a more efficient and
precise operation.
Compact size
Enhances mowing maneuverability, as well as fitting on trailers or storing more efficiently.
Drive tire stance
Narrow width (44: 44”, 52: 45”) allows for tight turns in corners, yet gives a very stable platform
for the operator.
Adjustable steering levers
Steering levers with comfort grip handles are designed with a wide range of adjustments to
accommodate almost any size of operator.
Stamped reinforcing ring added
to deck construction
Makes a stronger deck and reduces unwanted flex.
Deck Construction
Single welded frame design. 11 Gauge with 1” x 3/8” reinforcements.
Floating deck design
Deck has chain suspension which offers excellent flotation over uneven terrain.
Rapid Deck height adjustment
Spring loaded and foot operated lever action deck height adjuster with pin locator makes for
quick, easy, and precise cutting height adjustments.
4 Anti-scalp rollers
Two located on deck ends and two located toward mid-deck to keep scalping to a minimum.
1 1/2" to 4 1/2" Cutting height
in 1/4" increments
Provides a good range of cutting heights for any type of turf grass.
Tires
Wide tires offer excellent ground flotation. Heavy wheel forks take abuse.
Front caster action wheels
Two front mounted ribbed tread caster action wheels mounted in heavy duty pivoting caster
forks for quick and durable response.
High blade tip speed
44" = 16,811 fpm and 52" = 18,937 fpm (Assures a good finish cut.)
High lift blades
Heavy-duty high lift blades are .20” thick to handle the wear, with a high lift design to stand the
grass up before cutting. Made from highest quality ™Marbain steel for longer blade life.
1" blade spindles mounted in
Ductile iron housings and ball
bearings
Blade spindles and spindle housings are designed to handle heavy shock loads.
Accessible blade spindle zerks
Makes greasing the blade spindles easy.
Single Kevlar Drive Belts
Drive belts made with Kevlar
TM
fiber provide long belt life. One hydrostatic pump drive belt
and one deck drive belt is easier to maintain and not as expensive as multiple belt designs.
Electric clutch control
Easy and smooth engagement of the mower blade drive system.
Hydro-Gear ZT-2800
TM
(Zero-Turn Transaxle)
drive unit on each rear wheel
Each mower has a homeowner friendly integrated hydrostatic transaxle containing a pump and
drive motor for each rear wheel. Except for changing hydraulic filters, these units are self
contained and are maintenance free.
Integrated Transaxles fans
Transaxles stay cooler.
Choice of Honda or premium
Briggs Intek Series Engines and
18, 20, or 25 HP
Makes it possible for you to buy more value, performance and power for your dollar.
Center mounted rear engine
Provides increased air flow around engine fins to extend engine life. Also it provides maximum
mower stability, increased leg room and easy service access. Spark plugs, air cleaner, choke
and throttle can be serviced from the rear verses the side.
Easy Engine service Access
Oil dipstick, oil drain ports, air filter, oil filter, spark plugs, choke and throttle can be serviced
from the rear verses the side.
Isolated exhaust muffler
Mufflers are tucked away to reduce noise and to provide additional protection against burns.
Electric start
Easily starts with the turn of a key.
Hour meter
Measure actual engine run time to monitor service intervals.