Line 6 Looper JM4 - Manual (Page 19)

Footswitch Modes
4•1
F
ootswitCh
m
odes
Jam Control Mode
All Amp Model & FX controls, the buttons, wheel and 4-way are available in this mode.
You’ll spend most of your time in Jam Control Mode, although you have the option of
engaging one of the Alternate Footswitch Modes at any time, as outlined in the descriptions
on the following pages. Here’s how the 4 switches operate in Jam Control Mode:
Record/Overdub – step on Record to begin recording your loop. If you start with
a Song or Drum countoff, recording begins after the count. If you punch in while a track is
playing, recording begins on the nearest beat. Overdub on an existing track at any time.
Play/Stop – this switch simply plays or stops your loop. On your first pass, when you
initially record your loop, hitting Stop also sets your loop out-point.
Undo – step on this switch to undo your last recording take. To clear a track, press
and hold for a few seconds, then select Clear from the LCD menu and press Undo again.
Mode Switch – step on this switch and the JM4 enters Alternate Footswitch Mode.
Hit it again within 1.5 seconds and you’ll toggle thru the 4 alternate modes. After 1.5
seconds of inactivity, it will remain in the currently selected mode. Return to Jam Control
Mode by simply stepping on the switch again. This will exit the current mode and put you
back where you started, so you’ll always be one switch away from controlling your loop.
A B C D
D
A
B
C