Lowrance electronic X102C - Manual (Page 78)

74
To adjust the Surface Clarity level
1.
From the Sonar Page, press MENU |
↓ to
S
ONAR
F
EATURES
| ENT .
2. 2. Press
↓ to
S URFACE C LARITY
| ENT .
3. 3. Press
↓ or ↑ to select clarity level|
EXIT | EXIT | EXIT .
Sonar Features menu with Surface Clarity selected (Left, dual-
frequency menu; right, single-frequency menu).
In the illustration at left, Surface Clarity is turned off.
The right view shows Surface Clarity set at High.
Transducer Type
(X107CDF only)
A dual-frequency unit includes a T
RANSDUCER
T
YPE
command. With this
option you can tell your unit what type of transducer you're using, so it
can properly interpret the signals it's receiving.
To change your transducer type, press MENU | MENU |
↓ to
T
RANSDUCER
T YPE
| ENT . Select the appropriate transducer type and press
ENT | EXIT | EXIT .
Surface clutter