Lowrance electronic X102C - Manual (Page 55)

51
the other without, then the target with brighter color (yellow) is the
stronger signal. This helps distinguish weeds from trees on the bottom,
or fish from structure.
ColorLine is adjustable. Experiment with your unit to find the Color-
Line setting that's best for you.
To adjust the ColorLine level
1. From the Sonar Page, press MENU |
↓ to
C
OLORLINE
| ENT .
2. The ColorLine Control Bar appears. Press
↓ to decrease ColorLine;
press
↑ to increase ColorLine.
3. When it's set at the desired level, press EXIT .
Contrast
See the entry in this section for Screen Contrast and Brightness.
Depth Cursor
The depth cursor consists of a horizontal line with a digital depth box on
the right side. The numbers inside the box show the depth of the cursor.
Left, Sonar Page menu with Depth Cursor selected. Right, sonar chart
with the depth cursor active. The cursor is 34.64 feet deep.
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press MENU |
↓ to
D EPTH C URSOR
| ENT .
2. The depth cursor appears. Press
↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press EXIT .
Cursor line
Depth box