Lucent Technologies MDW 9031DCP - Manual (Page 13)

MDW 9031/9031DCP Dual Zone Pocket Phone
503-801-169
Dual Zone Administration Dual Zone Pocket Phone
1
Issue 2 April 1999 6
If all calling groups are already used, group hunting can be set up between
the two radio modules. See your PARTNER Communications System
manual for information on applying setups.
Administration for PARTNER 206 Board(s)
For the PARTNER 206 Board(s), you must administer 2 station ports
(extensions)—one for each radio module. In this configuration, an intercom
call coming into one zone does not ring in the other zone. However, a call
coming in from the Central Office rings in both zones.
Administration for MERLIN 1030/3070 and MERLIN II
For MERLIN 1030/3070 and MERLIN II Communications Systems, you
must administer 2 station ports (extensions)—one for each radio module.
Call coverage should be set up between the two radio modules so that both
station ports (extensions) ring simultaneously on the Dual Zone handset. See
your MERLIN Communications System manual for information on applying
call coverage setups.
Note: You must disable the Voice Announce feature for both station
ports (extensions) for the Dual Zone handset to work properly.
Administration for MERLIN 206, 410, 820, and MERLIN
Plus
For MERLIN 206, 410, 820, and MERLIN Plus Communications Systems,
you must administer 2 station ports (extensions)—one for each radio
module. In this configuration, an intercom call coming into one zone does
not ring in the other zone. However, a call coming in from the Central Office
rings in both zones.
Note: You must disable the Voice Announce feature for both station
ports (extensions) for the Dual Zone handset to work properly.
Administration for MERLIN LEGEND
For MERLIN LEGEND Communications Systems, you must administer 2
station ports (extensions)—one for each radio module.