Lucent Technologies Voice Terminal 8410 - Manual

1
DEFINITY
®
Enterprise Communications Server (ECS)
Release 5
8410 Voice Terminal
Quick Reference
555-230-764
Comcode 107672974
Refer to the procedures on this card to use the
features on your 8410 voice terminal. The features
here are listed in alphabetical order. In the spaces
provided, write the feature access codes for your
system. For more information about any of these
features, see your system manager or refer to the
DEFINITY
® Enterprise Server (ECS), Release 5
8410 Voice Terminal User’s Guide, 555-230-763.
USING THE SOFTKEYS
If your 8410 has a display, you may be able to access
up to 12 features with the softkeys. You can activate
available softkey features by pressing
and then
the softkey below the feature abbreviation. If the
feature you want to use is not on the bottom line of the
display, press
or until you see the
feature you wish to access. When the feature is active,
an arrow appears above the feature. (However, if the
feature requires you to dial a telephone number or
extension, such as Call Forwarding, you will
temporarily see the digits you are dialing, rather than
the arrow, above the feature name.)
To program/reprogram an AD button
1 Pick up handset.
NOTE: For speakerphone users, press a call
appearance button or press
.
2 Press softkey below Prog (for display users)
or Press
or Dial AD Program access code _________.
3 Press AD button to be programmed.
ABBREVIATED DIALING (AD)
Menu
Next Prev
Speaker
Program
8410.qref.def3 Page 1 Monday, August 17, 1998 9:09 AM