LSI SYM22801 - Manual (Page 40)

2-26 Installing the SYM22801 Host Adapter
The peripheral device SCSI IDs are usually set with jumpers or with a
switch on the peripheral. Refer to the peripheral manufacturer’s
instructions and to the user’s manual for your computer to determine the
ID of each device and how to change it. You must have no duplication
of SCSI IDs on a SCSI bus.
Step 1. Determine the SCSI ID of each device on the SCSI bus. Note
any duplications and if 8-bit SCSI devices are to be used, the
host adapter ID must not be set above 7.
Step 2. Make any necessary changes to the SCSI IDs and record the
IDs for future reference. The following table is provided as a
place to keep this record.
Table 2.1 SCSI ID Record
SCSI ID SCSI Device
15
14
13
12
11
10
9
8
7 SYM22801 Host Adapter (default)
6
5
4
3
2
1
0