LG WM2016C - Manual (Page 15)

HOW TO USE THE WASHER
ENGLISH
1 5
• Press repeatedly to adjust the volume of the
Beeper.
11. Beeper
• Select a water temperature based on the type of
load you are washing.
• Follow the fabric care label and chart below for
best results.
• Warm rinses leave the loads dryer than cold
rinses. Warm rinses increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses save energy.
• The Cold rinse temperatures depend on the cold
water at your faucet.
• Warm rinses are regulated at approximately
86°F (30°C).
• For the Tap Cold/Cold setting, both wash and rinse
temperatures depend on the cold water at your
faucet.
8. Wash/Rinse Temperature
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options.
• To start Drain/Spin cycle:
1. Press Power button to turn on.
2. Press Spin Speed button only.
3. Press Start/Pause button.
9. Spin speed
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is on.
10. Soil Level
Suggested Wash Temp. Garment
Hot Whites and Heavy
122°F (50°C) soiled color-fast items
Warm
Most loads
104°F (40°C)
Cold Brightly colored items,
77°F (25°C) washable woolens
LED DISPLAY
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear much
longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the
cycle, as is typically shown on a top-loading
washer.
2. ESTIMATED TIME REMAINING
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
1. DOOR LOCK INDICATOR
Shows how much of the current wash cycle has
been completed.
3. CYCLE COMPLETION INDICATOR
This portion of the display shows the selected
cycle, operating status, and special messages.
If a cycle has special instructions, they will also
be displayed in this area.
4. STATUS/CYCLE DISPLAY
2
1
3
4