La Crosse Technology WS-7107U - Manual (Page 5)

5
QUICK SETUP
Hint: Use good quality Alkaline Batteries
and avoid rechargeable batteries.
1.
Have the indoor weather station and
remote temp/humidity sensor 3 to 5 feet
apart.
2. Batteries should be out of all units for
10 minutes.
3. Place the batteries into the remote
temp/humidity sensor first, then into
the indoor weather station.
(All remote temp/humidity sensors
must be started before the indoor
weather station)
4. DO NOT PRESS ANY BUTTONS
FOR 15 MINUTES.
In this time the indoor weather station and
remote temp/humidity sensor will start to
talk to each other and the displays will show
both the indoor temperature and an outdoor
temperature and humidity. If the indoor