LG LHY-518 - Manual (Page 28)

28
Before Operation (Continued)
TV Aspect
4:3 Letter Box: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Pan Scan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
• If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
Recorder Combi Receiver to a standard (analog) tel-
evision, set Progressive Scan to OFF.
• If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to ON.
Caution
Once the setting for Progressive Scan output is entered, an
image will only be visible on a Progressive Scan compatible TV
or monitor. If you set Progressive Scan to ON in error, you
must reset the Recorder Combi Receiver. First, remove the
disc in the Recorder Combi Receiver. Next, press STOP (x)
and hold it for five seconds before releasing it. The video out-
put will be restored to the standard setting, and a picture will
once again be visible on a conventional analog TV or monitor.
Power Save Mode
Set Power Save Mode to ON to place your Recorder
Combi Receiver into an economic power save mode.
ote
All indicators will turn off in the Recorder Combi Receiver’s
Display window.
Factory Setting
If you wish, you can reset the Recorder Combi Receiver
to its original factory settings. Select “SET” then press
ENTER.
The Initialize menu will appear. Use the b B buttons to
select “Yes” and press ENTER.
ote
Some options cannot be reset. (Movie Rating, Password and
Country Code)
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
ON
OFF
Prev. Select Close
Power Save Mode
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
Power Save Mode
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
SET
Prev. Select Close
It initializes the system status.
Proceed?
No Yes
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Factory Setting
Progressive Scan
ON
OFF
Prev. Select Close
Power Save Mode