La Crosse Technology WS-8056U - Manual (Page 8)

8
F) CALENDAR SETTING
Note: When the WWVB signal is found, that date will over-ride the manually set
date.
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press and release the “SET” button 5 more times until the default
year “00” flashes in the date LCD.
2) Press and release the “+” button to select the year.
3) Press and release the “SET” button to confirm the year and to move to
select the month.
4) The default month “1” will flash. Press and release the “+” button to select
the appropriate month.
5) Press and release the “SET” button to confirm the month and to move to
select the date.
6) The default date “1” will flash. Press and release the “+” button to select
the appropriate date.
7) Press and release the “SET” button to confirm the date and to move to
select the weekday.
8) The default weekday “MON” (depends on selected language) will flash.
Press and release the “+” button to select the appropriate weekday.
9) Press and release the “SET” button to confirm the calendar settings and to
advance to select either 12 or 24-hour time display.
G) 12/24-HOUR SETTING
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press and release the “SET” button 9 more times until the “12” hour
time display flashes in the time LCD.
2) Press and release the “+” button to toggle between 12 and 24 hour time.
3) Press and release the “SET” button to confirm the 12/24-hour time display
and to advance to select either
°F or °C.
H) SELECTING
°F OR °C
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press and release the “SET” button 10 more times until the default
“
°F” flashes in the time LCD.
2) Press and release the “+” button to toggle between
°F and °C.
3) Press and release the “SET” button to confirm the
°F or °C selection and
exit the Program Mode.