Setup, Connecting, Setup menus – Linn PRE- AMPLIFIER User Manual
Page 11
6
Setup
EXOTIK PRE-AMPLIFIER
Owner’s Manual
English
Setup
Connecting
The first stage in setting up your EXOTIK is to connect your sources, power amp(s) and
other peripheral devices to the EXOTIK.
1.
Ensure your EXOTIK and all components that you will be connecting to the EXOTIK
are disconnected from the mains supply.
2. Connect your source components, power amp(s) and any communication/control
devices you wish to use, referring to the back panel diagram in the
Connecting
chapter.
3. Connect the EXOTIK to the mains supply and turn the unit on using the switch on
the back panel. The front panel will display EXOTIK or EXOTIK+DA, depending on
your unit.
4. Press the key on the front panel or handset.
The main stage in setup is configuring the EXOTIK pre-amplifier to suit your
requirements. This is achieved using the setup menus. How to configure the EXOTIK is
explained in the rest of this chapter.
Setup menus
The setup menus enable you to configure your EXOTIK for all sources it is connected to,
the loudspeakers in your system and much more. To take advantage of your EXOTIK’s
features, please take the time to configure your unit correctly.
The setup menus are divided into four categories and are accessed via the MAIN MENU:
S
SP
PE
EA
AK
KE
ER
R S
SE
ET
TU
UP
P
For configuring the unit for the number and size of the loudspeakers in your system and
for calibrating their volume level. (EXOTIK+DA: also for setting the distance of your
loudspeakers from your listening position.)
S
SO
OU
UR
RC
CE
E S
SE
ET
TU
UP
P
For configuring sources on the unit.
A
AU
UD
DIIO
O S
SE
ET
TU
UP
P
For configuring the audio output of the unit.
G
GE
EN
NE
ER
RA
AL
L S
SE
ET
TU
UP
P
For adjusting the general setup of the unit.
There is also a UNIDISK SETUP item in the MAIN MENU for accessing the setup menus
on a Linn UNIDISK player if one is present (see
Using the EXOTIK with a Linn UNIDISK
player, end of this chapter).
In addition, the EXOTIK features an INSTALLER MENU for saving the configuration of the
unit as set in the above menus and restoring the factory defaults. For full information
see
Installer menu, this chapter.