Linksys WAG54GS - Manual (Page 15)

Chapter4
Advanced Configuration
1 Wreless-G ADSL Gateway wth SpeedBooster
Passphrase Enter a Passphrase (also called a WPA shared
key) of 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is 300 seconds.
WPA2-Mixed
Security Mode > WPA2-Mixed
Encrypton TKIP + AES is automatically selected.
Passphrase Enter a Passphrase (also called a WPA shared
key) of 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is 300 seconds.
WPA-Personal
Security Mode > WPA-Personal
Encrypton WPA supports two encryption methods, TKIP
and AES, with dynamic encryption keys. Select the type of
algorithm, TKIP or AES. The default is TKIP.
Passphrase Enter a Passphrase (also called a WPA shared
key) of 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is 300 seconds.
WEP
Security Mode > WEP
Encrypton Select a level of WEP encryption, -bt or
128-bt.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
NOTE: The WEP Passphrase is compatible with
Linksys wireless products only. If you are use non-
Linksys products, manually enter the appropriate
WEP key on those devices.
WEP Key 1- If you did not enter a Passphrase, enter the
WEP key(s) manually.
TX Key Select which TX (Transmit) Key to use. The default
is 1.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless Access
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network’s radius.
Wireless > Wireless Access
Wireless Network Access
Allow All/Restrct Access To filter wireless users by MAC
address, either permitting or blocking access, select Restrct