Learning Resources Eggspert EI-7880 - Manual (Page 12)

11
CARING FOR EGGSPERT
• Clean EGGSPERT with a dry cloth. Do not immerse or spray any liquid or
water on the unit.
• To clean CONTROL and ANSWER BUTTONS, remove cords from Control
Center. Gently wipe BUTTONS with a damp cloth. Allow to dry before
reinserting cords into Control Center.
• Carefully insert BUTTON plugs into EGGSPERT. Do NOT remove them by
pulling on the cords.
• Do NOT immerse CONTROL and ANSWER BUTTONS in water or
other liquids.
OPERATING EGGSPERT WITH THE ADAPTER
Using the AC Adapter, EGGSPERT can run indefinitely without batteries. To use
the unit with the adapter, follow these instructions:
1. Plug the end of the adapter cord into the AC adapter jack, located on the
right side of EGGSPERT’s Control Center.
• EGGSPERT must only be used with the included AC adapter.
• The AC adapter should be examined regularly for damage to the cord,
plug, enclosure, and other parts. In the event of such damage, do not use
this AC adapter until the damage has been repaired.
• The AC adapter is not a toy.
2. Carefully plug the adapter body into an electric outlet.
• EGGSPERT must not be connected to more than the recommended number
of power supplies.
• Disconnect EGGSPERT from the AC adapter before cleaning.
For AC
Adapter