3)to adjust visual settings, Front control locations and functions – Lenovo E75 User Manual

Page 13

Notes

. • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place

subject to direct sunlight , or excessive dust or mechanical vibration or shock.

. • Save the original shipping carton and packing materials, as they will come in handy if you ever have

to ship your monitor.

. • For maximum protection, repackage your monitor as it was originally packed at the factory.
. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains can be

removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.

Front control locations and functions

Operation

(1)

Switching the monitor on/off ( ):

The ON/OFF switch is used for switching the monitor on and

off. The ON/OFF switch does not disconnect the device from the mains voltage. To completely

disconnect the mains voltage, please remove the power plug from the socket.

(2) Power indicator: This indicator lights up green when the monitor operates normally. If the monitor is

in Energy saving mode, this indicator color changes to flash

(3)

To adjust visual settings ( “ ”, “ ”, “ ”, “ ” ): Please following the procedure of

selection and adjusting an item using the OSD system as below steps for main functions adjustment.

Step 1: Press and release control key to activate the OSD menu.

Step 2: Press

key to highlight the desired option of OSD icon.

Step 3: Press and release key to access the option. The color of the inner area of the OSD will

changed from blue to green.

Step 4: To make your adjustments, press

key to increase or

key to decrease the setting.

Step 5: Press and release key to store the changed, the color of the inner area will go back to blue. You

can select other function to make adjustments by

and

key. Also you can select

EXIT icon or press key to exit the OSD menu.

Step 6: Additional adjustment function for contrast and brightness when press

or key

directly.