Logic Controls LK7000 - Manual (Page 9)

6
UTILITY DISK CONTENTS
All LK7000 keyboards come with a utility software disk. This disk
contains several important files:
LK7000D.EXE - Use this utility with or without the keyboard being
attached. It is used to program the keyboard.
For a complete description of how this program
works see the section “Programming the
LK7000
keyboard”.
LK7000 .TPL - This template was pre-programmed into the
keyboard and matches the legend shown on the
previous page. If you have any questions on how to
program a particular key you can refer back to this
template to see how it was originally programmed.
INSTALLING THE LK7000D .EXE UTILITY PROGRAM
The first step in using the LK7000D .EXE utility program is to copy the
program to your hard drive.
1. Insert the LK7000 utility software into drive A or B of the
computer.
2. Type MD LK7000 at the “C>“ prompt to make a directory named
LK7000 .
3. Type CD LK7000 to make the LK7000 directory active.
4. Type COPY A:*.* If the disk was inserted into drive A then all
files will be copied into the hard drive’s directory (
LK7000 ). If
drive B is used then you must type COPY B:*.*