Logic Controls LK7000 - Manual (Page 21)

PROGRAMMING THE KEYBOARD
1.Use the utility software supplied to program up to
256 alphanumeric characters per key. Utility
program will write to and read from computer disk
memor y.
2. Keyboard supports computer control keys (Shift,
CTRL, ALT, F1 through F12) and all arrow keys).
CONNECTOR PINOUTS
J1 (PS/2F) to PS/2 Keyboard
1
Keyboard Data
2 No Connection
3 Ground
4 +5VDC
5 Clock
6 Shield
J2 (RJ11F) to Computer
1
Clock
2 Data
3 No Connection
4 Ground
5 +5VDC
6 No Connection
J3 (RJ45F) to MSR
1
RDP1
2 RCP1
3 CLS1
4 RDP2
5 RCP2
6 CLS2
7 +5VDC
8 Ground
J4 (DB9M) RS232C to Computer
1
DCD
2 Receive Data (from computer)
3 Transmit Data (to computer)
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 No connection
Pins 1,4, and 6 are tied together internally
Pins 7 and 8 are tied together internally
MECHANICAL
Weight
Basic Unit 2.5lbs.
with MSR 2.7lbs.
with Scanner 2.6lbs.
Dimension (in inches)
STD w/MSR
Width 15.7 15.7
Depth 8.5 9.0
Front Height 0.5 0.5
Rear Height 1.8 3.0
w/legs ext. 2.2 3.7
Keys Full travel mechanical
Life cycle >10 million tactile cycles
MSR 2 tracks standard
Life Cycle 300,000 passes
SCANNER Laser
Class CDRH Class II
MTBF 100,000 hours
ELECTRICAL
Input voltage (from computer) +5VDC
Current
Basic Unit 25ma
MSR 50ma
Scanner
Standby 15ua
Scan Mode 100ma
Surge 130ma
ENVIRONMENTAL
Operating Temp 0 o C to +50 o C
Storage Temp -20 o C to +60 o C
Relative Humidity
Operating 85% max. non-condensing
Non-operating 90% max. non-condensing
Vibration (10 to 55 Hz.)
4G's
Shock 40G's
INTERFACE
Keyboard Wedge Standard
RS232C Optional
GENERAL INFORMATION
Keyboard interface cable, utility software, and
legend labels supplied.
18
LK7000 PROGRAMMABLE KEYBOARD SPECIFICATIONS
1
5
3
2
6
4
123456
12345678
1 2 3 4
6 7 8 9
J4 J1 J2 J3