Logic Controls LK7000 - Manual (Page 17)

SPECIAL CONFIGURATIONS
The keyboard can be set up with many different programming options. To
activate the configuration menu screen press F3. By depressing the high-
lighted letter in each option, the program will enable or disable that
option. The default settings are shown in the graphic below.
Send Break-codes for scan-codes
Enable beep while a key pressed
No beep if a key is undefined
Translate to code-set #2 for AT
Emulating XT keyboard always
Use ALT+num to generate ASCII
Enable Typematic for scan codes
Enable Typematic for ASCII codes
Emulating Link Terminal
InterCharacter Delay (+/-):
Enable RS232 Output
Baud Rate:
Parity:
Length of Data:
Yes
Yes
Yes
Yes
No
No
No
No
No
2
No
9600
NONE
8
Press a High-light Letter to select
Esc ==> Quit from this menu
mS
-bits
14