Lowrance electronic Mapping GPS Receiver - Manual (Page 66)

60
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select "(End of
route)" before adding them.
Navigate a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
Route Planning command on Main Menu, left; Routes menu, center; Edit
Route menu, right. Navigate command is selected in the Action box.
2. Press
↓ to select route name|
ENT |
↓ to
N AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT .
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to select route name|
ENT |
↓ to
N
AVIGATE
|
→ to
R
E-
VERSE
| ENT |
← to
N
AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT |
← to
Y
ES
| ENT .