LG A2UH243FA0(LMU240HE) - Manual (Page 19)

Service Manual 19
Installation
Preparing work for Installation (Artcool Type Only)
Open panel front
1. First, push the front panel backward and lift it up to remove the two screws.
2. The moment of lifting the both lower parts of panel front, you can hear sound this panel came out, In this time panel front is
separated
3. After pull down this panel a bit, and separate connecting wire with product.
Remove cover pipe and cover side
1. Remove two screws(for fixing cover pipe)
2. Pull up the cover side of desired connecting direction, then cover
side is separated.
3. In case of connecting direction is left or right, path through the
hole of cover side.
CAUTION: After removing the pipe hole, cut the
burr for safety.
When connecting pipe path through rear
wall, don’t remove the hole. NOTICE
Drain hose junction
1. Remove the rubber stopple of desired direction of
drainage.
2. As the following picture, Insert drain hose in the
handle of drain pan, and join drain hose and con-
necting hose.
Panel Front
Connector
Pipe hole
rubber cap
Only one
desiring direction
Connecting
part
Adhesive
Drain
hose