LSI SAS6160 - Manual (Page 63)

LSI Corporation | September 2010 Page 63
LSISAS6160 SAS Switch User Guide Chapter 4: SAS Domain Manager Command Line Interface | SDM-CLI Commands
4.2.7 Show Command (Intra-Domain) Use the show command to display domain, device, and phy
information. (See
Section 4.3, Sample Output for Show Command , to view samples of
the kind of information that is returned.)
Authority: User
Syntax:
show alias []
show device [|]
show domain
show phy [(|)[:]]
show version
show zonegroup []
show zoneset [active|data ]
Usage:
„ show alias
Displays a list of all aliases.
„ show alias
Displays detailed information for a single alias.
„ show device
Displays a table of all devices (expanders and end devices) in the domain.
„ show device |
Displays detailed information about a particular device (expander or end device).
SES environmental data is a subset of the information displayed for expanders.
„ show domain
Displays all domain overlays and their bindings to physical domains, flagging the
domain currently under focus.
„ show phy
Displays, in a tabular format, all expander phys residing in the domain.
„ show phy (| )
Displays, in a tabular format, all phys residing on a specific expander.
„ show phy (|):
Displays detailed information about a particular phy.
„ show version
Displays version information for both SDM-CLI and SDM-D.
„ show zonegroup
Displays a list of all zone groups.
„ show zonegroup
Displays detailed information about a single zone group.
„ show zoneset
Displays a list of all zone sets.
„ show zoneset active
Displays the name and detailed information for the active zone set.
„ show zoneset data
Displays detailed information about a single zone set.