Linksys WAP54G v2 - Manual (Page 19)

13 Chapter 5: Setting Up the Wireless-G Access Point
Wireless-G Access Point
9. You should now review the settings you've chosen. If these settings are correct, click the Yes button to save
these settings. If you wish to change any of the settings, click the No button. You will exit the Setup Wizard
and can start it again to revise your settings.
10. At this point, the configuration performed with the Setup Wizard is complete. To configure any other Access
Points in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup Wizard.
Figure 5-8: The Confirmation screen
Figure 5-9: The Congratulations screen